The information contained in this section explains how to change the system time and date on the various products sold by FSA CompTel.

• Comdial Telephone Systems - this page
• Comdial and Key Voice Technologies Voice Mail Systems
• Estech Systems - VoiceWorks
• Fujitsu Allegra
• Inter-Tel Telephone and Voice Mail Systems
• Lucent Telephone and Voice Mail Systems
• Nortel Telephone and Voice Mail Systems
• Panasonic Telephone Systems
• Panasonic Voice Mail Systems

Time Change - Comdial DSU and DSU II:

The date and time display on all Comdial extensions must be set from an attendant phone, ext. 10 or 100 as follows:

• Press "Intercom" to begin programming mode

• Dial * # 0 1

• Dial two digits (99 – 00) for the year

• Dial two digits (12 – 01) for the month

• Dial two digits (01 – 31) for the day

• Dial two digits (00 – 23) for the hour - Military Time Format

• Dial two digits (00 – 59) for the minutes

• Press "Speaker" to end programming mode

Time Change - Comdial DXP, DXP+ and FX:

The date and time display on all Comdial extensions must be set from the attendant phone as follows:

• Press "Intercom"

• Dial *#0*01

• Dial two digits (01 – 12) for the month

• Dial two digits (01 – 31) for the day

• Dial two digits (00 – 99) for the year

• Dial two digits (00 – 23) for the hour - Military Time Format

• Dial two digits (00 – 59) for the minute

• Dial "#" to Save

• Press "Speaker" to end

 For More Information Contact:


4234 Action St.
Garland, TX   75042
Tel: 972.980.1012
FAX: 972.980.4079
Internet: info@ccdallas.net

Send mail to webmaster@ccdallas.net with questions or comments about this web site.
Copyright © 2005 CompTel Communications
Last modified: July 02, 2008